ASTM D4303-2006 绘画涂料中使用的颜料耐光性的标准试验方法

时间:2024-05-02 04:04:11 来源: 标准资料网 作者:标准资料网 阅读:8371
下载地址: 点击此处下载
【英文标准名称】:StandardTestMethodsforLightfastnessofColorantsUsedinArtists'Materials
【原文标准名称】:绘画涂料中使用的颜料耐光性的标准试验方法
【标准号】:ASTMD4303-2006
【标准状态】:作废
【国别】:
【发布日期】:2006
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:D01.57
【标准类型】:(TestMethod)
【标准水平】:()
【中文主题词】:覆层;耐光性;涂漆;涂料;颜料;试验
【英文主题词】:artmaterials;colorants;lightfastness;lightfastnesscategories;relativehumidity;testspecimens;windowglassfiltereddaylightexposure;xenonarc
【摘要】:1.1Fourtestmethodstoacceleratetheeffectsoflongtermindoorilluminationonartists'materialsaredescribedbelow.Oneofthenaturaldaylightmethodsandoneofthexenon-arcmethodsareusedtocategorizethelightfastnessofcolorants.1.1.1TestMethodAExposureinsouthernFloridatonaturaldaylightfilteredthroughwindowglass.1.1.2TestMethodBExposureinArizonatonaturaldaylightfilteredthroughwindowglass.1.1.3TestMethodCExposureinanon-humiditycontrolledxenon-arcdevicesimulatingdaylightfilteredthroughwindowglass.1.1.4TestMethodDExposureinahumiditycontrolledxenon-arcdevicesimulatingdaylightfilteredthroughwindowglass.1.2Thesetestmethodsareusedtoapproximatethecolorchangethatcanbeexpectedovertimeincolorantsusedinartists'materialsexposedindoorstodaylightthroughwindowglass.Note1Thecolorchangesthatresultfromacceleratedexposuremaynotduplicatetheresultsofnormalindoorexposureinahome,artgallery,ormuseum.Therelativeresistancetochange,however,canbeestablishedsocoloredmaterialscanbeassignedtocategoriesofrelativelightfastness.Note2UserswhowishtotestcoloredmaterialsunderfluorescentilluminationshouldconsultPracticeD4674.1.3Lightfastnesscategoriesareestablishedtowhichcolorantsareassignedbasedonthecolordifferencebetweenspecimensbeforeandafterexposure.1.4ColordifferenceunitsarecalculatedbytheCIE1976L*a*b*colordifferenceequation.1.5Thesetestmethodsapplytocoloredartists'materials.1.6ThevaluesstatedinSIunitsaretoberegardedasthestandard.Thevaluesgiveninparenthesesareforinformationonly.Thisstandarddoesnotpurporttoaddressthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:G53
【国际标准分类号】:87_060_10
【页数】:9P.;A4
【正文语种】:


【英文标准名称】:StandardSpecificationforFiltersUsedinAirorNitrogenSystems
【原文标准名称】:空气或氮系统用过滤器的标准规范
【标准号】:ASTMF1791-1997
【标准状态】:作废
【国别】:美国
【发布日期】:1997
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:空气;过滤器;氮
【英文主题词】:nitrogen;air;filters
【摘要】:
【中国标准分类号】:J77
【国际标准分类号】:
【页数】:
【正文语种】:英语


基本信息
标准名称:丝锥螺纹公差
英文名称:Manufacturing tolerances on the threaded of portion taps
中标分类: 机械 >> 工艺装备 >> 刀具
ICS分类: 机械制造 >> 切削工具 >> 丝锥和板牙
替代情况:替代GB/T 968-1994
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:1967-03-04
实施日期:2007-12-01
首发日期:1967-03-04
作废日期:
主管部门:中国机械工业联合会
提出单位:中国机械工业联合会
归口单位:全国刀具标准化技术委员会(SAC/TC 91)
起草单位:成都工具研究所
起草人:邓智光、曾宇环
出版社:中国标准出版社
出版日期:2007-12-01
页数:7页
计划单号:20063843-T-604
适用范围

本标准规定了丝锥螺纹的牙型和其基本尺寸的极限偏差.本标准适用于加工普通螺纹用丝锥.

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T192 普通螺纹 基本牙型(GB/T192-2003,ISO68-1:1998,MOD)
GB/T193 普通螺纹 直径与螺距系列(GB/T193-2003,ISO261:1998,MOD)
GB/T196 普通螺纹 基本尺寸(GB/T196-2003,ISO724:1993,MOD)
GB/T197 普通螺纹 公差(GB/T197-2003,ISO965-1:1998,MOD)

所属分类: 机械 工艺装备 刀具 机械制造 切削工具 丝锥和板牙