【英文标准名称】:StandardSpecificationforDenseElastomericCompressionSealGaskets,SettingBlocks,andSpacers
【原文标准名称】:致密弹性压缩密封垫片、定位块和隔板的标准规范
【标准号】:ASTMC864-1999
【标准状态】:作废
【国别】:美国
【发布日期】:1999
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:密封;压缩;隔离件;密度;弹性体;垫片;预制的;门窗玻璃;弹性计;定位块
【英文主题词】:settingblock;compression;preformed;seal;elastomer;dense;spacers;elastomeric;elastomerpreformedgasket;gasket;gaskets;glazing;glazing
【摘要】:
【中国标准分类号】:Q24
【国际标准分类号】:91_100_50
【页数】:3P;A4
【正文语种】:英语
【英文标准名称】:TestMethodforDeterminationoftheSpectralMismatchParameterbetweenaPhotovoltaicDeviceandaPhotovoltaicReferenceCell(Metric)
【原文标准名称】:光伏器件和光伏比对电池光谱失配参数测定方法
【标准号】:ANSI/ASTME973M-1996
【标准状态】:现行
【国别】:美国
【发布日期】:1996
【实施或试行日期】:1998-02-06
【发布单位】:美国国家标准学会(US-ANSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:光电电池;光伏电池;太阳能
【英文主题词】:solarpower;photovoltaiccells
【摘要】:Thistestmethodcoversaprocedureforthedeterminationofaspectralmismatchparameterusedinthetestingofphotovoltaicdevices.Thespectralmismatchparameterisameasureoftheerror,introducedinthetestingofaphotovoltaicdevice,causedbymismatchbetweenthespectralresponsesofthephotovoltaicdeviceandthephotovoltaicreferencecell,aswellasmismatchbetweenthetestlightsourceandthereferencespectralirradiancedistributiontowhichthephotovoltaicreferencecellwascalibrated.ExamplesofreferencespectralirradiancedistributionsareTablesE490,E891,orE892.Thespectralmismatchparametercanbeusedtocorrectphotovoltaicperformancedataforspectralmismatcherror.Thistestmethodisintendedforusewithlinearphotovoltaicdevices.ThereisnosimilarorequivalentISOstandard.Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.ThevaluesstatedinSIunitsaretoberegardedasthestandard.
【中国标准分类号】:F12
【国际标准分类号】:27_160
【页数】:
【正文语种】:英语
基本信息
标准名称: | 60°、90°、120° 莫氏锥柄锥面锪钻 |
英文名称: | Morse taper shank countersinks for angles 60°and 90°,120° inclusive |
中标分类: |
机械 >>
工艺装备 >>
刀具 |
ICS分类: |
机械制造 >>
切削工具 >>
钻头、锪钻、铰刀
|
替代情况: | GB/T 1143-1984 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2004-02-10 |
实施日期: | 2004-08-01 |
首发日期: | 1973-12-06 |
作废日期: | 1900-01-01 |
主管部门: | 中国机械工业联合会 |
提出单位: | 中国机械工业联合会 |
归口单位: | 全国刀具标准化技术委员会 |
起草单位: | 成都工具研究所 |
起草人: | 沈士昌、聂珂星 |
出版社: | 中国标准出版社 |
出版日期: | 2004-06-14 |
页数: | 16开, 页数:4, 字数:7千字 |
书号: | 155066.1-21038 |
适用范围
本标准规定了60°、90°、120°莫氏锥柄锥面锪钻的尺寸。本标准只规定米制尺寸,对切削直径16mm至80mm的锪钻,以后也只推荐米制尺寸这些尺寸只适用于高速钢刀具,但生产上允许,柄部可用适合的材料代替,如碳钢。莫氏锥柄按GB/T1443的规定。除另有说明外,锪钻制成右切削。直柄锥面锪钻在GB/T4258中给出。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 工艺装备 刀具 机械制造 切削工具 钻头 锪钻 铰刀